Is It Time For A Blown Double Glazing Repair?
Condensation is an indication of double glazing that has been blown. It happens when the seal between two panes has been broken and allows inert gases to escape.
The need to have your double-glazed windows repaired is crucial. It will not just save you money and cut down on the noise outside however, it will also restore the insulation qualities of the window.
Damaged Seals
The window seals on double-glazed units are responsible for creating an airtight and watertight barrier that keeps cold and heat out. These seals can be damaged and result in misty windows, drafts and energy loss. If your windows are starting to appear to be damaged to the seals, then it is time for a repair or replacement.
There will be condensation on the glass panes as the first sign. This occurs when the inert gasses within the sealed unit break down, allowing warm outside air to enter your home. Once this happens the window must be replaced as the inert gas cannot be restored.
Another sign that is common is the appearance of black mould on your windows or window frames. This indicates that the seals are broken and moisture is getting into the frame. This can cause the wood to soften, warp and peel paint. Once the window has been replaced any moisture in the frame will be removed and you can return to the original thermal efficiency.
If you do decide to have windows repaired or replaced, you should also consider upgrading the double-glazing to A-rated energy efficient glass since this will further increase the efficiency of your heating and will reduce your energy bills. You can determine the energy rating of your windows by contacting the manufacturer or checking online.
A drafty window can be a sign that your seals on your windows are damaged or have been blown. If the window still keeps the cold out, it is worthwhile to replace the seals as soon as you can. This will enhance the performance of your windows.
A simple test you can perform to determine if your window seals are damaged is to rub the edge of your window with ice for a few seconds. If you cannot wipe away the fog from your window, then the seals are most likely to have been damaged. This is a problem that needs to be addressed immediately as it could result in lower insulation of double glazing and increased energy bills.
Water Leaks
Double glazing is a good investment that will pay off in the long run. It adds warmth to your home and reduces noise. It also increases energy efficiency. It's not a surprise that homeowners have problems with their windows. One common issue that can cause a double glazing replacement is condensation between the panes. This can cause windows to look dirty, or worse, let water in the property.
Water vapour condenses on cold glass, forming a layer of moisture that cannot be removed. This is a natural occurrence that occurs when temperatures drop in the evening or the windows are exposed to weather conditions that are wet such as heavy dew. This issue can be fixed by making sure your home is adequately ventilated and by using humidifiers in every room that is susceptible to accumulating moisture.
If you're unable to wipe away the water from your double-glazed windows the likelihood is that the unit has blown. This is the only way that water can get into the sealed unit after the gas has evaporated. There are companies who claim that they can fix existing misted double glazed units by drilling holes into the glass and injecting chemicals through them that absorb moisture inside the unit. This can help eliminate condensation and fog in a short space of time, but it's a temporary solution and requires repeated.
It's unrepairable when an enclosed unit fails. Your double glazing will have to be replaced as it won't have the same thermal insulation properties it had when new. Check with the company who installed your double glazing to find out whether it's still covered by warranty. In this case they'll either reinstate the warranty or provide you with a discount on the cost of replacing the unit.
There is another option for those with misted double glazing and that is a straightforward repair kit that can be purchased from a variety of online retailers. This involves drilling small holes into the glass and spraying in the right resin that fills in the gaps and prevents the water from leaking through the window panes. This is a more permanent and cost-effective option, however it must be done by a professional with the necessary experience.
Deterioration
If the seals in your double glazing aren't performing as they should, water can get into the space between the window panes, which will cause them to mist. This could lead to the windows losing their effectiveness as they are no longer able to keep cold outside and the warm in.
Depending on your circumstances the misting could cause water to form inside of your double glazing. This could cause damage to the frame, and if not addressed can cause water leaks and even growth of mould.
Misting may not always be as severe as it appears and it's a good idea to contact your installer to see if your windows are under warranty to find out whether they can assist in the repair or replacement cost. If they're not then you'll need to contact a specialist to complete repairs.
A professional can replace your damaged double-glazed windows and restore the thermal efficiency and eliminating any condensation. As soon as you notice misting, it's important to get the windows fixed. This will lower your energy bills and stop moisture from entering your walls or into the plaster that could cause serious damage.
A double-glazed window repair that is blown will not only restore the performance of the double glazing, but also ensure the safety of your family. Window repairs that are blown can have large gaps between the glass, which aren't ideal for children and animals to play with. A professional can even out pressure by drilling a small holes and then using silicone sealant for resealing your windows.
It's a good idea verify your double-glazed windows to see if they're covered by a guarantee. If you don't see any contact information, then you should ask your supplier to supply the information as you may be in a position to claim back a part of the installation costs. It is worth checking if the windows you purchase come with an all-year warranty. Contact your provider immediately if there are any problems with your double-glazed windows. You can contact them via telephone or in person. If you are able make sure to follow up your call in writing.
Poor Insulation
Double glazing is an investment that will add warmth to your home and block outside noise. They are also a great energy efficiency and insulation upgrade for any home. As with any home improvement there are always issues. One of these is when your double glazed windows begin to fog. Windows that have mist can be ugly and can ruin the clean design of your home. A build-up of moisture is an ill-health risk. Fortunately, this can be fixed with the help of professional blow-blown double glazing repair.
If you notice an accumulation of condensation on your double glazing it's likely that there is a leak in the gas space between the glass panes. This means that the gas inerts have evaporated and warm air can get into your home. This is a serious issue that must be addressed because double glazing won't serve its intended function and your home will be colder.
This is a normal phenomenon that happens in the evening or early morning hours when the temperature drops and dew forms. This isn't a reason to be concerned about and is simply the result of windows operating as they should.
The moisture that is present on the inside of double-glazed windows is another matter. This is often caused by poor ventilation and humidity levels within your home. Use extractor fans to reduce humidity in the kitchen and bathroom. Also, open your windows frequently to allow fresh air circulation.
Most of the time the blown double glazing repair will only require replacing the damaged window. A qualified tradesman first evaluates the condition of your window frame, and then determines the exact measurements needed to ensure that a replacement window can be cut to size. They will then take out the old window and replace it with a new one, making sure that all seals are installed to prevent moisture from entering your home.